The 2008 Honda Civic has two fuse boxes. The interior fuse box is underneath the steering column and the under-hood fuse box is on the driver’s side, next to the brake fluid reservoir. If something electrical in your vehicle stops working, the first thing you should check for is a blown fuse. Check those fuses first, but check all the fuses before deciding that a blown fuse is the cause. Replace any blown fuses, and check if the device works.
To replaces a Honda Civic fuse, first, turn the ignition switch to the LOCK (0) position. Make sure the headlights and all other accessories are off. Remove the cover from the fuse box. Check each of the large fuses in the under-hood fuse box by looking through the top at the wire inside. Removing these fuses requires a Phillips-head screwdriver. Check the smaller fuses in the under-hood fuse box and all the fuses in the interior fuse box by pulling out each one with the fuse puller provided on the back of the under-hood fuse box cover. Look for a blown wire fuse. If it is blown, replace it with one of the spare fuses of the same rating or lower.
- yhs-fh_lsonsw,2008 honda civic fuse box,honda civic 2008 fuse box,2008 Honda civic fuses,2008 honda civic ignition fuse,