How to Add 2007 Chevrolet TrailBlazer Radiator Coolant?
1. Remove the radiator pressure cap when the cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise about one full turn. If you hear a hiss, wait for that to stop. A hiss means there is still some pressure left. Keep turning the pressure cap. Remove the pressure cap.
2. Fill the radiator with the proper DEX-COOL® coolant mixture, up to the base of the filler neck. Then fill the coolant recovery tank to the FULL COLD mark. Note: The cooling system in Add 2007 Chevrolet TrailBlazer is filled with DEX-COOL® engine coolant. This coolant is designed to remain in your vehicle for five years or 150,000 miles (240 000 km), whichever occurs first, if you add only DEX-COOL® extended life coolant.
3. Put the cap back on the coolant recovery tank, but leave the radiator pressure cap off.
4. Start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan. By this time, the coolant level inside the radiator filler neck may be lower. If the level is lower, add more of the proper DEX-COOL® coolant mixture through the filler neck until the
level reaches the base of the filler neck.
5. Then replace the pressure cap. At any time during this procedure if coolant begins to flow out of the filler neck, reinstall the pressure cap. Be sure the pressure cap is hand-tight and fully seated.
- filling the radiator on a 2007 chevrolet trailblazr,how do I fill the radiator on a 2007 chevrolet trailblazer,trailblazer engine hot radiator cold,